Buffalo WZR-HP-G300NH2 救磚

前因 : 由dd-wrt v.24 升上v.3 又無reset settings, 升後重啟router不停reboot

使用windows TFTP救磚, 步驟如下:

1. 將電腦設定IP 為192.168.11.2, netmask 255.255.255.0, gateway 192.168.11.1

2. 以admin身份執行command prompt (cmd)

3. 執行 route print, 記低lan 卡的編號. 如下圖編號為10

===========================================================================
Interface List
14…00 xx xx xx xx 10 ……Bluetooth Device (Personal Area Network)
10…xx 61 xx xx xx xx ……Realtek PCIe GBE Family Controller
1………………………Software Loopback Interface 1
11…00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
12…00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
15…00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
===========================================================================

4. 執行 netsh interface ipv4 add neighbors 10 192.168.11.1 02-AA-BB-CC-DD-1A

5. 下載要重新flash嘅rom

6. 執行tftp client, server填入192.168.11.1 及選好要flash的rom

7. 用lan線連接電腦與router (lan), tftp client按flash嘅同時, 即刻插入router嘅電源

8. 等待router reboot

發佈留言

發佈留言必須填寫的電子郵件地址不會公開。 必填欄位標示為 *